Welcome to discuss your project requirements.
Welcome to discuss your project requirements.
For the wooden molded industrial pallet, the raw materials can be wood chips, straw, etc., which is the overall structure, panel, and 9 support feet once mold-shaped. The upper surface of the pallet plate is smooth and can meet the transport of various goods, the under surface uses a stiffener. Plate longitudinal and horizontal force is balanced, nine foot distribution to meet the forklift four-way insert. It is a four-way fork in, a single-sided pallet.
The entire production process is carried out at high temperatures and pressures, killing any insects and microorganisms that remain in the material, and at the same time preventing the re-intrusion and propagation of any other insects due to the high density of the wood pallets produced. This kind of molded product is the latest "artificial wood packaging material" rather than the traditional "solid wood packaging materials", its products no longer need pest control, the product does not have any live insects and microorganisms, in line with ISPM15 (International Standard for Phytosanitary Measures 15 ) requirements for Wood Packaging Products.
The applicable raw material types of molded pallet presses are wide, covering a variety of renewable resources and wastes, which are specifically classified as follows:
1. Wood raw materials
Waste wood: waste wood, wood chips, shavings, sawdust, log scraps, etc.
Recycled wood products: waste wood materials such as waste pallets, wooden boards, branches, and wood chips.
2. Plant fiber raw materials
Agricultural by-products: straw, hemp stalks, cotton stalks, and sugarcane bagasse.
Fiber: tropical plant materials such as palm fiber, coconut shell fiber, and bamboo fiber.
Industrial fiber waste: waste kraft paper, waste chemical fiber, cloth scraps, etc.
3. Agricultural and food processing waste
Shell raw materials: rice husks, fruit shells (such as coconut shells), nut shells, etc.
Processing residues: bagasse, palm tree residues, wheat straw, etc.
4. Mixed waste materials
Composite waste materials: wood chips mixed with recycled plastics, plant fibers combined with rubber particles, etc., used to prepare high-performance composite pallets
1. Wood materials: wood chips, shavings, sawdust, log scraps, waste wood, waste pallets, wooden boards, branches.
2. Fiber materials: straw, rice husk, cotton stalks, bagasse, palm fiber, bamboo fiber, waste kraft paper, waste chemical fiber, cloth scraps.
3. Composite waste materials: wood chips mixed with recycled plastics, plant fibers combined with rubber particles.
The crushed wood chips or straw were dried at 300-450 ℃ for 3 min, the heat treatment time was 30 min, the water in the material was removed, then mixed with the thermosetting resin, and molded at 220 ℃. The pressure was 1400 psi or 98kg/cm3. In this process, the internal temperature of the pallet reaches 105 ° C, the internal temperature of the pallet is maintained above 56 ° C for more than 30 minutes, and the final moisture content of the product is not more than 9%.
Preparation of raw materials: According to the requirements of the pallet load-bearing choose wood or straw varieties, chipped into 1-2mm toothpick-like sawdust, strictly control the bark of the impurity content of not more than 5%, after magnetic separation into the dryer, raw materials after drying moisture content ≤ 5%.
Mixing: In order to prevent wood chips broken, we should not use a high-speed mixing machine, the general use of a roller mixing machine, set up two spray systems, in order to add the two should not be mixed together. Generally use isocyanate and urea-formaldehyde resin mixture, or phenolic resin and melamine resin, the amount of sizing is 3% -8%. After the measurement of wood chips and quantitative adhesive at the same time into the mixing machine, mixed wood moisture content should be controlled in the range of 6-8%.
Pavement and hot pressing: adopts special equipment, pavement two times, the first for pallet and preload, and then do the plane part of the pallet. Punches fixed in the upper part of the hot press on the activities of the beam, the die is between the hot press and paving machine, placed on the lower press table, a special stripping device. Will be mixed with wood chips in the mold, the pre-pressure, hot pressed until the resin can be fully cured after the mold. First sintered wood chips, quantitative paving into the metal mold in the cold pressing preforming. And then placed in a hot press in the press molding.
Side trimming: mainly for the side cutting, that is, to remove the edge of the product surplus flash.
| Model | PM-1000 | PM-1250 |
| Dimension(m) | 3×5.05×5.25 | 3.2×5.05×5.4 |
| Weight(t) | 32 | 36 |
| Power(kw) | 37 | 37 |
| Capacity(pcs/set/h) | 8-16 | 8-16 |
| Pressure(t) | 0-1000 | 0-1250 |
| Hydraulic cylinder diameter(mm) | 500 | 550 |
| Hydraulic cylinder quantity | 4 pieces | |
| Voltage | Customized | |
Capacity: 180 Pcs/Day
Location: Mexico
Configuration: Crusher, mixer, glue mixer, hydraulic press, cooling system, waste recycling system, plc
Capacity: 180 Pcs/Day
Location: India
Configuration: Crusher, mixer, glue mixer, hydraulic press, cooling system, waste recycling system, plc
Capacity: 180 Pcs/Day
Location: Guangdong
Configuration: Four-column frame, hydraulic system, frame, mold, material laying system, PLC control system
Welcome to discuss your project requirements, we will give you customized Proposal & Quotation within 24 hours.
According to the customer's actual requirements, raw materials and use of customized solutions
Own production base, strict production standards and processes, professional quality control.
Engineers track the entire service, install and commissioning the equipment to ensure successful operation.
Provide technical support, technical service, technical training, after-sales service.
